SolidWorks Simulation Xpress

Basic Testing Capabilities for SolidWorks Parts

SolidWorks SimulationXpress is a built-in first pass design analysis tool included with SolidWorks, SolidWorks Professional and SolidWorks Premium

SolidWorks SimulationXpress is the first and only built-in design verification tool for testing part designs quickly and easily within 3D mechanical design software. SolidWorks SimulationXpress can help you achieve the following objectives:

Verify whether your design will work, and if it will behave exactly as you intend. You can determine whether your design places too much load on given components, possibly causing breakage.
Quickly investigate the relative merit of a wide range of designs, thereby weeding out the worst designs and highlighting the best. Using design analysis to test your designs is much quicker and less costly than building and testing physical prototypes.
Test radical new designs without cutting metal. These might be designs you previously would not have completed because they would be too tedious or time consuming to build and test.

SolidWorks SimulationXpress is suitable for stress analysis of simple parts, giving you the ability to simulate the effect of force or pressure loads on those parts. Once you have your stress results, SolidWorks SimulationXpress can generate HTML reports and create SolidWorks eDrawings files to document and communicate the results of the analysis. For SolidWorks users who need additional functionality, it is easy to upgrade from SolidWorks SimulationXpress to SolidWorks Simulation. See it action....

Perform a first-pass design check on simple SolidWorks parts.
Determine the factor of safety of your parts.
Easily document and share your results with HTML reports and SolidWorks eDrawings.
Enjoy the benefits of design simulation and analysis free inside SolidWorks.
Easily upgrade to SolidWorks Simulation if additional functionality is needed.

What are the Differences between SimulationXpress and SolidWorks Simulation?

Several bundles of SolidWorks Simulation are available. SolidWorks Simulation is the natural upgrade from SolidWorks SimulationXpress. The following table compares the functionality of SolidWorks SimulationXpress to SolidWorks Simulation:

Table: Differences between SolidWorks SimulationXpress and SolidWorks Simulation

Capability	SolidWorks SimulationXpress	SolidWorks Simulation
Geometry Types
Part analysis	Y	Y
Assembly analysis		Y
Thin parts, sheet metal parts, shells		Y
Analysis Types
Stress & Displacement	Y	Y
Thermal Stress		Y
Contact analysis in assemblies with friction		Y
Fluid Flow (SolidWorks Flow Simulation)		add-on
Motion Simulation (SolidWorks Motion)		add-on
Usability
Multiple Studies, “what if scenarios”		Y
Parameters & Design Tables		Y
Customizable Material Library		Y
Evironments (Loads/Restraints)
Uniform pressure & force on faces	Y	Y
Fixed restraints on faces	Y	Y
Directional & non-uniform pressure & force		Y
Force on edges and vertices		Y
Body loads: gravity & centrifugal		Y
Special loads: torque, remote, bearing		Y
Fixed restraints on edges & vertices		Y
Directional and prescribed restraints		Y
Temperature, convection, radiation, heat power		Y
Assembly Connectors
Springs, Elastic Foundation		Y
Pin, Bolts, Rigid, Spot Weld		Y
Visualisation
Stress plot, deformation, displacement plot	Y	Y
Factor of safety calculation and plot	Y	Y
Principal stress, directional stress, strain plots		Y
Result probing, listings		Y
Dynamic section, iso plots		Y
Scaled plots, superimposed plots, customizations		Y
Engineering Collaboration
HTML report	Y	Y
Publish SolidWorks eDrawings of analysis results	Y	Y
Animation and save as AVI	Y	Y
Detailed HTML report customizations		Y
Save as bitmap, JPEG, VRML, XGL		Y

Design Zarr