Our previous two blog posts have focused on the SOLIDWORKS
Admin Portal. Set up of this portal and assigment of SOLIDWORKS products to the
respective users (members) is an important prerequisite before SOLIDWORKS
Online Licensing can be used- so both are worth a read. Links at the end of
this blog allow you to go back and recap any of these previous two.
Before we delve into the specifics of setting up Online
Licensing, let me give some high level information:
- You do not have to make your SOLIDWORKS serial key an “Online Licensed” product- it is optional.
- You can change your mind and revert a SOLIDWORKS Online License product back to a traditional activation based product at any time and as many times as you wish.
- To convert a SOLIDWORKS license to an Online Licensed product, it must be assigned to a user in the Admin Portal and have its current machine based activation deactivated.
- Online Licensing is only available for standalone products, and NOT floating products using SolidNetWork Licensing.
- Online licensing will only work for SOLIDWORKS 2018 products and newer.
- As the name suggests you should only use Online Licensing on machines where an internet connection is reliable and available more often than not.
- Online Licensing is great for individuals that need to use SOLIDWORKS on different PCs (i.e. home and office) as your access to the software follows your user login account.
- You “login” to use SOLIDWORKS rather than the activation server being checked as it does with traditional machine based activation.
- Online licensing is not using SOLIDWORKS in the cloud- it is simply a means of validating your access to your locally installed version of SOLIDWORKS.
- There is an offline mode you can trigger for up to 30 days.
- You can only login on one PC at a time, but don’t need to remember to keep logging out since there is a force sign-out option.
- You can synchronise your SOLIDWORKS settings by storing them within your account- therefore no matter where you login, your user interface, keyboard and mouse shortcuts etc can stay the same.
- Online licensing is available for permanent (perpetual) and term (rental) license types.
- A user can mix online licenses with traditional activation based and Network (SNL) licenses- i.e. online enabled SOLIDWORKS, activation based Simulation and Network based PDM on the same machine.
- Online licensing is great for admins- if a user leaves the company you simply remove their access to the license- with machine based activation you cannot revoke a license unless you retain the PC they used SOLIDWORKS on.
- Online licensing removes the need for the individual to remember to deactivate their license at the end of the work day to allow use at home, and likewise deactivate when finished with at home to use again at work.
Still think it is for you? Then read on…
Swapping a product to Online Licensing
This is all done via the Admin Portal as discussed in blogs 1 and 2 in this
series. Therefore you must have invited the member who will use online
licensing into the Portal and have the Admin account login information to make
the change, or ask the Admin user to do this for you.
Once you have found the serial key (from the Products tab) you wish to make
online enabled you click into it and will see this screen:
As per the tooltip, Online Licensing is prevented until the
traditional activation of SOLIDWORKS is removed from the machine that is
listed. For my machine, SSM-AHARTLES, I need to open SOLIDWORKS and use Help > Deactivate License. This
still has to be done even if you intend to use Online Licensing on this same
The other requirement is that the product is assigned to only
one user/member- this would be shown further down that same screen. Any more
than one member, you should select and remove the ones not required from this
is the workflow that would allow a product to be made Online License enabled:
the product is made Online License enabled here is what happens under various
conditions on the user’s PC.
User assigned to Online Licensing
already has SOLIDWORKS installed
Of course prior to making the licensing Online ready, you had to deactivate
SOLIDWORKS, so naturally when it is next opened on the user’s PC it will
request activation. The activation server now knows it is an Online License and
so you will get an initial warning of this prompting to open SOLIDWORKS again,
followed by a login request. Only the user login that has been assigned this
license will be accepted.
New machine installation
You can use a “Login” option on the installer screen- this will then know the
product serial keys assigned to this user and so automates the entering of the
serial number information. Once installed, the login screen as above appears on
first launch. If you choose not to login during install, then the first launch
of SOLIDWORKS will query the serial key status, realise it is an Online license
and request login.
Working between two or more machines
The beauty of online licensing is that you can login to SOLIDWORKS on any PC
that has SOLIDWORKS installed with your assigned serial key without needing to
remember to deactivate the license. This is the workflow working between more
than one PC.
- SOLIDWORKS is installed on both PCs with the same installation serial key- this would likely be the case already for the home and office environment online licensing is great for.
- The Product is assigned to a Member (user) and made Online Licensing ready.
- SOLIDWORKS is launched on a PC (work for example) and the login screen allows access to SOLIDWORKS.
- At the end of the working day you close SOLIDWORKS down but have not logged out.
- You get home and open SOLIDWORKS on your Home PC and are asked to login.
- The work PC is seen to have the login assigned to it and so you would see this message
- Saying Yes to this logs out the session at work and allows you to continue at home. The reverse then happens at work the following day if you forget to logout at home.
If you do remember, you can always logout of the SOLIDWORKS
session to avoid the warning above being displayed and instead just get the
normal login screen.
There may be a scenario (although unlikely) that you forgot
to close down SOLIDWORKS on the other PC and maybe left some files open in that
session (e.g. at work). In this event as above when you launch SOLIDWORKS to
start using again (e.g. at home) you get the same warning to logout the other
session. What you won’t see on the work PC (until you get back to the office)
is the message below. This is basically saying the SOLIDWORKS session has been
interrupted by being logged out and any files that need saving can be. You
would therefore have to act on this message before re-opening SOLIDWORKS at
work the following day.
Switching back from Online Licensing to Machine
If you are not finding the online licensing good
for you (for example you keep losing internet connection) you can swap back to
the machine based activation method you have used up to now.
This is all done by the Admin back in the Admin Portal. This will only be
denied if an active session (and login) is found - so use the Logout option
pictured earlier or close SOLIDWORKS on the PC before switching back.
SOLIDWORKS is restarted after being switched back to Activation-based there is
an initial warning after the login attempt, but when SOLIDWORKS is restarted it
reverts to the Activation wizard screen.
What else can I do with Online Licensing?
When logged in to an Online License session you can use the profile icon in the
upper right corner to gain more menu items as below. Most notably you can
logout in readiness for use elsewhere (don’t worry if you forget this though)
or you can take the license offline for up to 30 days.
You can also synchronise your settings so that wherever you
use the software things look and work in a familiar way. Using Tools
> Options > Synchronize Settings you can upload and set the
frequency of the synchronisation. More information on this can be found here.
So there we are for blog number 3. A lot to take in on this
one but ultimately it is important to understand if online licensing will be
right for you and some of the message dialogues you may see when making the
switch. Our last blog on the subject are some frequency asked questions.
By Adam Hartles
Group Technical Manager
NEXT BLOG >>>>>>
04 Frequently Asked Questions
PREVIOUS BLOG <<<<<<
02 Using the SOLIDWORKS Admin Portal