UK - 01926 333777
ROI - 01 297 4440
01926 333777
SOLIDWORKS Elite Specialists

Creating a Pack and Go

Tuesday January 1, 2019 at 12:00pm
Using the 'Pack and Go' command allows you to collect all related documents into one file. This is useful for quickly saving and sending entire projects. The guide below explains how. 

SOLIDWORKS: Creating a Pack and Go

View an interactive step by step guide below by pressing the play button below.

For the best experience view the guide full screen click here.

If you prefer the solution is outlined in text below.


2. Open the part, drawing or assembly you would like to Pack and Go.

3. Go to File -> Pack and Go.  

4. Select which associated files are to be zipped.

5. Check “Save to zip folder”.

6. Select browse to select where to save the Zip and what to call it.

7. Select Save.

Related Blog Posts

Hardware Setup and Support
When you receive a new system there are some things you can do to ensure optimum performance and other things that are good to know in the event of problems. This blog details everything you need to know if you encounter an issue.
How to Remove Padlocks from your Customer Portal
The SOLIDWORKS Customer Portal is locked to non-subscription supportedcustomers, sometimes if the serial number is not registered properly theseappear if you do have a maintained subscription.
SOLIDWORKS Safe Mode: Software OpenGL
If you’re having problems with SOLIDWORKS not performing correctly especially in terms ofgraphics, you can run in a safe mode. This safe mode removes the graphics card from running inSOLIDWORKS and hence highlights whether or not it is causing a prob...