UK - 01926 333777
ROI - 01 297 4440
Search
01926 333777
SOLIDWORKS Elite Specialists

Jingle Bell : SOLIDWORKS Tutorial

Friday December 21, 2018 at 11:54am

For our third Christmas blog post this year – we have created a jingle bell. To create this jingle bell, knowledge of surface techniques is desirable, but not necessary as it is simple enough for you to follow along with the video tutorial. Features such as wrap are used to wrap the sketch for the cut the details from the bottom of the bell along with sweep operations.    

 

  

Modelling Overview:

  • Step One: Create the revolved profile on the front plane and generate a revolved surface
  • Step Two: Using an offset plane, create a sketch for the bell opening
  • Step Three: Wrap the sketch onto the revolved surface
  • Step Four: Carry out a series of surface offsets and thicken the desired surface
  • Step Five: Sweep the ring typically used to hang the jingle bell

Related Blog Posts

Modelling an Archimedes' Screw
Archimedean screws are often referred to as “water screws” since they are commonly used to transport water between different heights. We often see some of our customers do screw feeders and we thought it may be beneficial to create a blog documenting...
What's New SOLIDWORKS 2020
SOLIDWORKS 2020 is nearly here and brings with it a whole host of new features and enhancements. If you're looking to find out what's new, then look no further.
Designing the Scorpion - Game of Thrones
As huge fans of the show we have been wanting to model something from it ever since the last episode aired. Check out this video to see how SOLIDWORKS could have been used to help design arguably the most impressive piece of engineering in Westeros -...
Top